欢迎光临精艺兴业~

400-0592-051

产品目录

贝意克1100℃迷你型马弗炉

品名: 贝意克1100℃迷你型马弗炉
型号: MF-1100C-S
  • 产品详情
  • 规格参数

主要特点

1、该款马弗炉体积只相当于笔记本大小,功率1KW,重量只有12kg,实验室必备通用型实验电炉

2、可作为实验室材料烧结炉、退火炉、熔炼炉、齿科炉等使用

3、装有通气口,作为氮气保护炉,氧化炉,炭化炉使用


技术参数Technical Parameters  


视频展示


Power/Voltage

输入电源/电压

 

Power rated: 1KW (220V)

额定功率:1KW (220V) 

Voltage rated: AC 220V 50/60HZ

额定电压:AC 220V 50/60HZ

 

 

Furnace Construction

炉子结构

 

 

 

 

 

High purity fibrous alumina insulation for maximum energy saving - 30% less power consumption than other brands

采用高纯氧化铝作为炉膛材料,**程度减小能量损失,比一般加热炉减少30%能耗。

Two 8 mm diameter hose barb connectors (gas inlet and outlet) (see pic below) in the furnace back 

炉体后面有两个Φ8mm 的通气口,可以在烧样时通入惰性气体。 


炉体采用双层结构,中间设置风道,保证炉体表面温度和电气控制部分温度不超过60℃。


采用弹簧门扣,很好的解决了设备内膛因高温产生的收缩缝隙。


 

 

Working Temperature

工作温度

 

 

 

Max. Temperature: 1100℃( 1 hr)

**温度:1100℃ (1小时)

Continuous working temperature: ≤1000℃

持续工作温度:≤1000℃

Recommended Heating Rate: 5-40℃/min

推荐升温速率:5-40℃/分钟

Max. heating rate:50℃/min

**升温速率:50℃/分钟



Temperature Controll

控温方式

PID automatic control and auto-tune function.

模糊PID控制和自整定调节

30 programmable segments for precise thermal processing.

智能化30段可编程控制

Built-in protection for the over-heated and broken thermocouple. 

超温和断偶报警功能

Thermocouple

热电偶

K type

K型

Heating Elements

加热元件

Fe-Cr-Al Alloy doped by Mo

电阻丝(掺钼铁铬铝合金)

Temperature Accuracy

控温精度

+/- 1℃

Dimensions

尺寸


 

Chamber size(L*D*H): 100*100*100mm (1L)

腔体尺寸(长*深*高):100*100*100mm (1L)

Furnace size(L*W*H): 230*250*370mm

炉子尺寸(长*宽*高):230*250*370mm

Net Weight

净重

12kg

Packing dimensions(L*W*H)

包装尺寸(长*宽*高)

370*300*450mm(wooden case)

370*300*450mm(木箱)

Shipping weight

毛重

18kg

Warranty

质保

One year limited warranty with lifetime support  (Such consumable parts as resistance wire are NOT supported by the warranty)

一年质保终身支持(消耗品如电阻丝不在质保范围内)

Attention

警示

The equipment is not sealed, and can not be put into toxic, harmful, inflammable and explosive gas. Can add the inlet port to pass through the inert gas or oxygen.

此设备腔体不密封,不能通入有毒有害,易燃易爆气体。可以加装进气接头,通惰性气体或者氧气

Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating.

在使用过程中炉膛表面可能出现细小裂纹。这是正常情况,裂纹可以用氧化铝涂层修复。

You shall place the sample in to a crucible.  Never place sample on the chamber bottom directly.

建议将样品放进坩埚里。不要把样品直接放在腔底。

Compliance

认证

CE Certified

CE认证

All electric components ( >24V) are UL / MET / CSA certified

所有电气部件( >24V)都有UL / MET / CSA 认证

The furnace is ready to pass TUV(UL61010) or CSA certification at extra cost.

可付费进行TUV(UL61010)或CSA认


标准配置

高温手套 坩埚钳 垫砖  电源线